简体中文 | English

User Upgrade Introduction

DAS-Gripper supports upgrading its edge-side software, which is divided into two parts: upgrading the APP and upgrading the underlying software

APP Upgrade
The APP upgrade will update the application-layer code.

Underlying Software Upgrade
he underlying software upgrade will optimize drivers, alignment functions, and more.

User Upgrade Process

1. Generally, follow the process of upgrading the APP first and then the underlying software. If the individual upgrade time does not exceed 5 minutes, please contact after-sales support promptly. If there is a long loading time without an update, you can try upgrading the underlying software using an SD card first and then updating APP.

2. Ensure that the device has sufficient battery power throughout the upgrade process (around 50%).

---

APP Upgrade Process

1. Ensure the device is successfully connected to Wi-Fi.

   

2. In the Settings interface, find "Version Check".

   

3. Click "Version Check". The system will automatically detect the latest version.

   • Example prompt:
     New version detected: 0.0.36
     Current version: 0.0.35
     Cancel | Update

     

4. Click "Start download".

   • Progress is displayed during download.

   • After download is complete, a prompt will appear to click "OK" to restart the device.

     

5. After the download is complete, enter the update confirmation interface.

   • Prompt message:
     Upgrade package download completed.
     Latest version: 0.0.36
     Current version: 0.0.35
     Click "Update" to install. The device will automatically restart after installation.

     

6. Click "Update" to begin the installation process.

   • Prompt: Installing update, the device will automatically restart shortly.

     

7. After restarting, go to "Version Check" to confirm the update result.

   • If successful: Display "You are on the latest version. Current version: 0.0.36".

   • If failed: Retry the update multiple times.

     

---

Underlying Firmware Upgrade Process

Note: Perform the underlying firmware upgrade only after the APP upgrade is complete.

1. Download the latest underlying firmware version.

   • Select the latest underlying firmware version. Version update documentation

2. Download the latest version to an SD card.

3. Insert the SD card with the latest version into the device.

4. In the device Settings interface, find "Version Check".

   

5. Click "Version Check".

   • Prompt: New version detected: full 6.0.0
     Current version: 0.0.36
     Cancel | OK

     

6. Click "Update" to start the installation.

   • Prompt: Installing update, the device will automatically restart shortly.

     

7. After the upgrade is complete and the device has restarted, you can remove the SD card.